Choosing The Next Number; Accepting Incoming Calls - Access Flow2 User's Manual & Installation Instructions

6 Use
1.3

Choosing the next number

1 s
If the connection to the first contact does not succeed, you can choose to go to the next pre-
programmed number. This is done as follows:
1 Press the yellow alarm button briefly during the call once. The next number is now dialed.
Note
If the contact's number redirects to voice mail, you must also briefly press the yellow alarm button
once to call the next number.
1.4

Accepting incoming calls

The landline is connected to the CM. An incoming call can therefore also be accepted while using
the stair lift.
1 s
When there is an incoming call, the CM produces a ring tone. Accepting is done as follows:
1 Briefly press the yellow alarm button once. The connection is established. Speak in the
direction of the alarm button to communicate.
The call can be ended by pressing the yellow button for 1 second.