Programming The Telephone Numbers; Setting The Speaker Volume; Setting The Ring Tone Volume - Access Flow2 User's Manual & Installation Instructions

10 Programming

2.6 Programming the telephone numbers

*025*0*[telefoonnummer1]#
*025*1*[telefoonnummer2]#
*025*2*[telefoonnummer3]#
Tip
Preferably, switch off the telephone microphone.
1 Enter the following code on the telephone to put the CM in programming mode: **#
2 Program the telephone numbers as follows:
To program the first number, enter the following code:
*025*0*[telephonenumber 1]#
To program the second number, enter the following code:
*025*1*[telephonenumber 2]#
To program the third number, enter the following code:
*025*2*[telephonenumber 3]#

2.7 Setting the speaker volume

The speaker volume can be set from 0 to 9, where 0 is silent and 9 is very loud. The standard
setting for this is 7. The following command must be entered to change this setting:
1 Enter the following code on the telephone to put the CM in programming mode: **#
2 Enter the following code:
*019*[volume level 0-9] #

2.8 Setting the ring tone volume

The ring tone volume can be set from 0 to 9, where 0 is silent and 9 is loud. The standard value
for this is 5. The following command must be entered to change this setting:
1 Enter the following code on the telephone to set the CM in programming mode: **#
2 Enter the following code:
*020*[volume level 0-9] #
e.g.: *025*0*0101234567#
e.g.: *025*1*0207654321#
e.g.: *025*2*EMERGENCY NUMBER#
e.g.: *019*7#
e.g.: *020*2#