Antenna Feeder Cable; Fiber Cable; Figure 4-3 Appearance Of The Antenna Cable - Zte ZXSDR R8882 Hardware Description

Connections
l End A is connected to the PWR interface of ZXSDR R8882.
l
End B is connected to the corresponding terminals on the power supply adapter.
Note:
The EPBC embedded lightning arrester is used for the device and therefore external
signals are not transmitted through the cable transit box. During installation, the field
engineer needs to make a cable on site in accordance with the available power aviation
head and connect the power cable with the power connector.

4.4 Antenna Feeder Cable

Function
The antenna feeder cable connects the antenna feeder interface on the ZXSDR R8882
chassis to the main feeder, supporting transmitting and receiving of radio signals.
External View
This cable is an 1/2"
in Figure

Figure 4-3 Appearance of the Antenna Cable

Signal Definition
None
Connections
l
One end is connected to the ANT interface on the ZXSDR R8882 chassis.
l
The other end is connected to the main feeder.

4.5 Fiber Cable

Function
In the ZXSDR R8882 system, a fiber cable can be used to:
l
Connect an RRU to a BBU.
l
Connect two cascaded RRUs.
SJ-20111021104623-003|2012–01–30 (R1.1)
RF cable (50Ω). A DIN connector is mounted on both ends, as shown
4-3.
4-3
ZTE Proprietary and Confidential
Chapter 4 External Cables