Toshiba MK6017MAP Product Specification page 78

360014937
Word descriptions:
WORD 0: General configuration
bit 15 0=ATA
bit 14-8 Reserved
bit 7 1=Removable cartridge
bit 6 1=Fixed disk drive
bit 5-3 Reserved
bit 2 Response incomplete
bit 1-0 Reserved
The value for this WORD is 0040h.
WORD 1: Logical cylinder number that user can access (in default mode) [*1]
WORD 2: Specific configuration
"37C8" : Device requires SET FEATURES subcommand to spin-up after power-up and IDENTIFY DEVICE
response is incomplete.
"738C" : Device requires SET FEATURES subcommand to spin-up after power-up and IDENTIFY DEVICE
response is complete.
"8C73" : Device does not requires SET FEATURES subcommand to spin-up after power-up and IDENTIFY
DEVICE response is incomplete.
"C837" : Device does not requires SET FEATURES subcommand to spin-up after power-up and IDENTIFY
DEVICE response is complete.
"All other valies" : Reserved
Power-up in Standby feature set is not supported.
The value for this WORD is C837h.
WORD 3: Logical head number that user can access (in default mode) [*2]
WORD 4-5: Reserved
WORD 6: The number of logical sector per track (in default mode) [*3]
Default Values : [*1],[*2],[*3]
Drive Type
MK6017MAP
WORD 7-9: Reserved
WORD 10-19: Serial number
WORD 20-21: Reserved
WORD 22: Number of vendor specific ECC Bytes transferred to READ/WRITE LONG operation.
It is vendor specific ECC transfer length for READ/WRITE LONG commands, specified by SET
FEATURE command with FEATURES RESISTERS = 44H.
The value for this WORD is 002Eh.
- 578 -
[*1] : Word 1 [*2] : Word 3 [*3] : Word 6
12416
− −
− −
Copyright ©2000 Toshiba corporation. All rights reserved.
15 63
− −
− −