Command Register - Toshiba MK6017MAP Product Specification

360014937

10.7.10 Command Register

- CS0
The command register accepts commands for the drive to perform fixed disk operations. Commands are
executed when the TASK FILE is loaded and the command register is written and only when:
The status is not busy (BSY is inactive).
DRDY (drive ready) is active.
Any code NOT defined in the following list causes an Aborted Command error. Interrupt request (INTRQ)
is reset when a command is written. The following are acceptable commands to the command register.
- 556 -
DA2-DA0 : 7
and
Copyright ©2000 Toshiba corporation. All rights reserved.
Write only