Identify Device (Ech) - Toshiba MK6017MAP Product Specification

10.8.23 Identify Device (ECh)

COMMAND CODE
REGISTER SETTING
DR
CY
HD
SN
SC
FT
The identify device command requests the drive to transfer parameter information to the host. When the
command is issued, the drive sets BSY, stores the required parameter information in the sector buffer, sets
the DRQ bit, and issues an interrupt. The host may read the parameter information of the sector buffer. The
parameter words in the buffer are arranged as shown in Table10.8.23-1∼3.
1 1 1 0 1 1 0 0
drive no.
Copyright © 2000 Toshiba corporation. All rights reserved.
REGISTER
NORMAL COMPLETION
no change
no change
no change
no change
00H
no change
360014937
-
573 -