Toshiba MK6017MAP Product Specification page 75

WORD
57-58 Current capacity in sectors
(Number of current cylinders * Number of current heads * Number of current
sectors per track)
59 15-9 Reserved
8 1=Multiple sector setting is valid
7-0 XXh=Current setting for number of sectors that can be transferred per
interrupt on R/W Multiple command
60-61 Total number of user addressable sectors (LBA mode only)
62 15-8 Single word DMA transfer mode active
7-0 Single word DMA transfer mode supported
63 15-8 Multiword DMA transfer mode active
7-0 Multiword DMA transfer mode supported
64 15-8 reserved
7-0 Advanced PIO Transfer Modes Supported
65 Minimum Multiword DMA Transfer Cycle Time Per Word (ns)
66 Manufacturer's Recommended Multiword DMA Transfer Cycle Time
67 Minimum PIO Transfer Cycle Time Without Flow Control (ns)
68 Minimum PIO Transfer Cycle Time With IOCHRDY Flow Control
69-79 Reserved (for future command overlap and queuing)
80 Major version number
0000h or FFFFh = device does not report version
15-4 Reserved for ATA-6~14
5 1=supports ATA/ATAPI-5
4 1=supports ATA/ATAPI-4
3 1=supports ATA-3
2 1=supports ATA-2
1 1=supports ATA-1
0 Reserved
81 Minor version number
0000h or FFFFh = device does not report version
82 Command set supported.
0000h or FFFFh = command set notification not supported
15 Reserved
14 1=NOP command supported
13 1=READ BUFFER command supported
12 1=WRITE BUFFER command supported
11 1=WRITE VERIFY command supported
10 1=Host Protected Area feature set supported
9 1=DEVICE RESET command supported
8 1=SERVICE interrupt supported
7 1=release interrupt supported
6 1=look-ahead supported
5 1=write cache supported
4 1=supports PACKET Command feature set
3 1=supports power management feature set
2 1=supports removable feature set
1 1=supports security feature set
0 1=supports SMART feature set
11
ATA-3 defines this field as "Vendor specific (obsolete)" To maintain compatibility between ATA-2, the drive supports this field as
specified in ATA-2. This field may be used for other purposes in future models.
Table 10.8-2 Identify Information (Continued)
DESCRIPTION
bit 7-2 Reserved
bit 1 = 1 PIO MODE 4 supported
bit 0 = 1 PIO MODE 3 supported
Copyright © 2000 Toshiba corporation. All rights reserved.
11
14
360014937
Hex.
XXXX
01XX
[5*]
XX07
XX07
0003
0078
0078
0078
0078
0000
003E
0000
7C6B
-
575 -