Nop (00H); Recalibrate (1Xh); Flush Cache (E7H) - Toshiba MK6017MAP Product Specification

360014937

10.8.1 Nop (00h)

COMMAND CODE
REGISTER SETTING
DR
CY
HD
SN
SC
FT
LBA
The Nop command reports the status. The drive terminates the command with aborted error after receiving
this command.
5
10.8.2 Recalibrate
COMMAND CODE
REGISTER SETTING
DR
CY
HD
SN
SC
FT
LBA
This command will set BSY bit and move the R/W heads on the disk to cylinder 0. At the completion of a
seek , it revises the status, resets BSY and generates an interrupt.

10.8.3 Flush Cache (E7h)

COMMAND CODE
RESISTER SETTING
This command reports the completion of a Write cache to the host. At the completion of a Write cache,
the drive revises the status, resets BSY and generates an interrupt.
5
ATA/ATAPI-4 defines this command as Vendor specific. The drive supports this command to maintain ATA-3, and the previous
models compatibility. User is recommended not to use this command.
- 560 -
0 0 0 0 0 0 0 0
drive no.
(1xh)
0 0 0 1 X X X X
drive no.
DR
Copyright ©2000 Toshiba corporation. All rights reserved.
REGISTER
NORMAL COMPLETION
no change
no change
no change
no change
no change
no change
no change
REGISTER
NORMAL COMPLETION
no change
00H
no change
no change
no change
no change
00H
1 1 1 0 0 1 1 1
drive no.