Creating A Raid; Deleting A Raid; Folder Management - Thecus N299 User Manual

Creating a RAID

To create a RAID volume, follow the steps below:
1. On the RAID Configuration screen, set the RAID storage space as JBOD,
RAID 0, or RAID 1 — see
description of each.
2. Tick the checkboxes of the hard disks you wish to use to create a RAID.
3. Specify a stripe size — 64K is the default setting.
4. Press Create to build the RAID storage volume.
NOTE
WARNING

Deleting a RAID

To delete a RAID volume, follow the steps below:
1. On the RAID Configuration screen, click Remove.
2. The system automatically removes the RAID volume and you can create a
new RAID.
WARNING

Folder Management

From the Storage menu, choose
Folder, and the Folder screen
appears. This screen allows you to
create and configure folders on the
N299 volume.
Folder
Item
Folder name
Description
NFS
ACL
Edit
Del
Remove
Add
Appendix C: RAID Basics
Building a RAID storage space may take time, depending o
and RAID mode.
Creating RAID destroys all data in the current RAID. The data is unrecoverable.
Removing RAID destroys all data in the current RAID. The d ata is unrecoverable.
Description
Displays the name of the folder.
Provides a description of the folder.
Press NFS to setup access privilege.
Press ACL (Access Control List) to configure which users have
access to this folder.
Press Edit to enter the Edit screen and modify the folder's
name and description.
Press Del to delete the folder. A screen appears asking to
confirm the deletion.
Press Remove to delete folder.
Press Add to enter the Add Folder screen.
26
for a detailed
n the size of hard drives