Front Panel - Thecus N299 User Manual

Front Panel

The N299's front panel displays the unit's array of status LEDs, and is also where
you'll find the power button and USB port. See the table below for a detailed
explanation of each:
Item
Power LED
System Status LED
HDD1 LED
HDD2 LED
One-Button USB
Copy
WAN LED
LAN LED
USB LED
Description
•
Solid blue: N299 is powered on
•
Blinking orange: system is starting up
•
Blinking red: system error
•
Off: system startup complete; system operating normally
•
Solid blue: HDD 1 detected
•
Blinking blue: Active HDD 1 data transfer
•
Solid red : HDD 1 error detected
•
Blinking red: HDD 1 capacity is nearly full (90% or more)
* If RAID is configured, capacity is based on the entire RAID
system.
•
Solid blue: HDD 2 detected
•
Blinking blue: Active HDD 2 data transfer
•
Solid red : HDD 2 error detected
•
Blinking red: HDD 2 capacity is nearly full (90% or more)
* If RAID is configured, capacity is based on the entire RAID
system.
•
One-Button Copy
Push once to copy entire USB volume to the N299. A short
beep will sound to acknowledge that files are now being
copied. Files are stored in a folder named by current time
stamp: (YearMonthDayHHMM)
•
Solid green: network link
•
Blinking green: network activity
•
Solid green: network link
•
Blinking green: network activity
•
USB Device Connection
o Blinking blue (5 seconds): USB device connected
successfully.
*For universal USB memory card readers, the USB LED
will blink blue when one or more card is mounted
successfully.
10