System Design And Sizing The Heat Pump - Trane Exergy P30 Installation And Operation Manual

P 60 – P 450 main parts
D044805 ver. 3
Pos. Part
1 Control panel
2 Control cabin
3 Evaporator
4 Condenser
6 Subcooler

3.3 System design and sizing the heat pump

Heat pump or pumps must be selected and configured based on the actual capacity
required and the operating conditions specific to the site. These parameters are
specified by the customer.
If there is a change in operating conditions, the original heat pump settings are no
longer valid and need to be checked.
EXEP01 2150EN
The assembly may vary depending on the scope of delivery.
Pos. Part
7 Compressor
8 Refrigerant pressure double relief valve
with change valve
10 Dryer-filter
11 Expansion valve
12 Frequency converter
17 (64)