Hach TitraLab Basic User Manual page 11

Figure 5 Connection of feed tubes
Connection of the electrode
1. Connect the electrode cable to the SO
back of the TitraLab.
The power is supplied via the TitraLab.
Connection of the electrode tubes
The electrode has three tubes with screw connections.
1. Screw one tube onto the burette valve.
2. Screw one tube into the OUT socket of the ACID pump.
3. Screw one tube into the OUT socket on the ALKALI pump.
-ELECTRODE port on the
2
Figure 6 Connection of the electrode
Power supply, external
D A N G E R
Risk of electric shock
Make sure the AC supply voltage is suitable for the power supply and the mains
plug style is suitable for the type of outlet socket.
Only use the original power supply and plug connectors.
The power supply is provided with different plug connectors. The correct
plug connector must be attached to the power supply before first use.
English 11