Technical Data - eisenblatter PTX COMPACT HT Original Instructions Manual

EN
Original instructions PTX COMPACT HT

7. Technical data

Subject to change in accordance with technical progress.
Measured values determined in conformity with
EN 60745.
Direct current (cordless machines)
~ Alternating current (mains powered
machines)
Machine in protection class II
(mains powered machines)
During operation the noise level can exceed 80 dB(A).
Wear ear protectors!
Permitted wheel diameter
Maximum wheel width
Tool holder
No-load speed (maximum speed)
No-load speed (adjustable)
Nominal power input
Power output
Weight without cord
Emission values:
Vibration emission value (surface grinding) /
uncertainty (vibration)
Typical A-effective perceived sound levels:
Sound-pressure level / uncertainty
Acoustic power level / uncertainty
16
High-energy, high-frequency interferences can cause
speed fluctuations. The fluctuations disappear, however,
as soon as the interference fades away. The technical
specifications quoted are subject to tolerances (in com-
pliance with the relevant valid standards).
Emission values: These values make it possible
to assess the emissions from the power tool and
to compare different power tools. The actual load may be
higher or lower depending on the operating conditions,
the condition of the power tool or the accessories. Please
allow for breaks and periods for assessment purposes
when the load is lower. Arrange protective measures for
the user, such as organisational measures based on the
adjusted estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
D mm (in)
B1 mm (in)
max
n min (rpm)
-1
n min (rpm)
-1
V
P W
1
P W
2
m kg (lbs)
a / K m/s
2
h, SG h,SG
L / K dB(A)
pA pA
L / K dB(A)
WA WA
PTX COMPACT HT
105 – 115 (4.1 – 4.5)
50 (2)
M14
3,000
800 – 3,000
1,100
640
2.7 (5,0)
6.0 / 1.5
93.0 / 3.0
104.0 / 3.0
www.eisenblaetter.de