Advertisement
MINI-MAX
®
MINI-MAX
with a flexible shaft
- Flexible shaft is mounted into the collet of the machine with a wrench.
- For perfect handling of the flexible shaft, mount the supplied special machine holder
onto the MINI-MAX. Now you can suspend the machine on a hook etc.
- All the available 6 mm shaft tools can now be mounted onto the collet of the flexible
shaft.(Optional 1/4 inch) providing easy access to hard to reach spots.
(The flexible shaft is not suitable for cordless MINI-MAX!)
Technical Data:
850 watts; 230 volts, 50 Hz; continuous speed adjustment between 3,700 - 13,000 rpm.
Speed step:
A =
B =
C = 6,000 rpm
D =
Maximum diameters of shafted tools: 60 mm
Maximum diameters of discs: 65 mm
Maximum diameters of cutting discs: 75mm
Maintenance:
The machine is maintenance free.
However, it should be blown out from time to time to keep the cooling slots free of dirt.
Exchange worn belt as follows:
Take gearbox cover off by loosening screws, pull out front shaft, slide belt over both toothed wheels. Put
shaft back into position and screw on gearbox cover. Turn machine a couple of times with your hand to
make sure that the belt is running smoothly. Now the machine is ready for action again.
Warranty:
A 12 month warranty (as from invoice date) is given for all electrical and mechanical parts, except in the case
of interference from a third party.
Spares can be supplied according to the spare parts list.
We will carry out all necessary repairs.
®
3,700 rpm
4,500 rpm
7,500 rpm
E =
9,500
rpm
F =
11,500
rpm
G =
13,000
rpm
Advertisement
