Installation
July 2022
3.4
Electrical, signal, compressed air in and sample
gas connection details
3.4.1
Mains electrical connection
DANGER
ELECTRIC SHOCK
Serious injury or death will occur.
The leak detection system operates using mains voltage and must be switched off and the
power cable removed before opening the analyzer.
WARNING
HAZARD BY WRONG SUPPLY VOLTAGE
Serious injury or death could occur.
The rated voltage for the leak detector is fixed during the manufacture and defined on the
ratings label fitted to the unit.
The voltage at the installation site must meet the rated voltage required.
Procedure
1. All electrical /connections are fitted to the rear panel of the leak detector .
2. Power to the leak detector is connected through the Mains Power Inlet using the
38
connector provided.
Reference Manual
00809-0100-4245
Rosemount CT4215