Roland T-8 Owner's Manual page 18

Using the Bass Sequencer
Setting the accent strength
1. Press the [BASS] button to select the bass.
2. Hold down the [ACCENT] button and turn the [TEMPO/VALUE] knob.
Inputting accents and slides using step input
Besides inputting accents and slides in step mode or in keyboard mode, you can also input them all at once.
1. Press the [BASS] button to select the bass.
2. Press the [ACCENT] button.
"b.ACC" is displayed, and you can use the step buttons to input the bass accents.
3. Press the [ACCENT] button again.
"b.SLd" is displayed, and you can use the step buttons to input the bass slides.
18