Roland T-8 Owner's Manual page 12

Using the Rhythm Sequencer
Setting the sub step probability
Here's how to set the probability for sub steps to play back.
1. Hold down an instrument button and press the step 1–16 buttons. (Keep holding down the instrument
button until the operation is finished.)
The setting for the current sub step (OFF–FLAN) is shown.
2. Press the [ACCENT] button.
The probability value (P.0–P.100) for the sub step is displayed.
3. Use the [TEMPO/VALUE] knob to set the sub step probability.
Setting the velocity
This shows how to input the velocity (how soft or loud the note plays) for the steps of each instrument.
1. Press one of the step 1–16 buttons (and keep holding the step buttons until the operation is finished).
The probability value (P.0–P.100) is displayed.
2. Press the [ACCENT] button.
The velocity value (v.0–v.10) is displayed.
3. Turn the [TEMPO/VALUE] knob to set the value.
12