AJAX KeyPad User Manual page 7

When touching KeyPad, it wakes up highlighting the keyboard and indicating the
security mode: Armed, Disarmed, or Night Mode. The security mode is always
actual, regardless of the control device that was used to change it (the key fob
or app).
Event
Malfunction indicator X
KeyPad button pressed
The system is armed
The system is disarmed
Incorrect passcode
A malfunction is detected when arming
(e.g., the detector is lost)
The hub does not respond to the command —
no connection
KeyPad is locked after 3 unsuccessful attempts
to enter the passcode
Low battery
Connecting
Before connecting the device:
blinks
Indication
Indicator noti es about lack of communication
with hub or keypad lid opening. You can check
the reason for malfunction in the
Security System app
A short beep, the system's current arming state
LED blinks once
Short sound signal, Armed mode / Night mode
LED indicator lights up
Two short sound signals, LED disarmed LED
indicator lights up
Long sound signal, the keyboard backlight
blinks 3 times
A long beep, the system's current arming state
LED blinks 3 times
Long sound signal, the malfunction indicator
lights up
Long sound signal, security mode indicators
blink simultaneously
After arming/disarming the system, the
malfunction indicator blinks smoothly. The
keyboard is locked while the indicator blinks.
When activating KeyPad with low batteries, it
will beep with a long sound signal, the
malfunction indicator smoothly lights up and
then switches off
Ajax