AJAX KeyPad User Manual page 17

Scenarios and sirens react to disarming under duress in the same way as to normal
disarming.
To use a common duress password:
Enter the common duress password and press the disarming key
For example: 4321 →
To use a personal duress password:
Enter user ID, press *, then enter personal duress password and press the
disarming key .
For example: 2 → *
To use a duress access code:
Enter the duress access code and press the disarm key
For example: 4567 →
How the re alarm muting function works
Using the KeyPad, you can mute the interconnected re detectors alarm by
pressing the Function button (if the corresponding setting is enabled). The
reaction of the system to pressing a button depends on the state of the system:
Interconnected Fire Detectors Alarms have already propagated — by the
rst press of the Function button, all sirens of the re detectors are muted,
except for those that registered the alarm. Pressing the button again mutes
the remaining detectors.
The interconnected alarms delay time lasts — by pressing the Function
button, the siren of the triggered FireProtect/FireProtect Plus detector is
muted.
Learn more about Interconnected Fire Detectors Alarms
→ 4422 →
.
.