AJAX KeyPad User Manual page 12

Keypad code
Duress Code
Function Button
Arming without Passcode
Unathorised Access Auto-lock
Auto-lock Time (min)
Brightness
Buttons Volume
Alert with a siren if panic button is pressed
Jeweller Signal Strength Test
Signal Attenuation Test
Keypad code only or Keypad and
user code
Setting a passcode for arming/disarming
a duress code for silent alarm
Setting
Selection of the button function *
Off — the Function button is disabled and
does not execute any commands when
pressed
Alarm — by pressing the Function button,
the system sends an alarm to the
monitoring station of the security company
and to all users
Mute Interconnected Fire Detectors Alarm
— when pressed, mutes the re alarm of
FireProtect/FireProtect Plus detectors. The
feature works only if Interconnected Fire
Detectors Alarms is enabled
Learn more
If active, the system can be armed by pressing
Arm button without passcode
If active, the keyboard is locked for the pre-set
time after entering incorrect passcode three
times in a row (during 30 min). During this time,
the system cannot be disarmed via KeyPad
Lock period after wrong passcode attempts
Brightness of the keyboard backlight
Volume of the beeper
The setting appears if the Alarm mode is
selected for Function button.
If active, the Function button pressing triggers
the sirens installed at the object
Switches the device to the signal strength test
mode
Switches the KeyPad to the signal fade test