When Should I Change The Dust Compartment Filter; Replacing The Dust Compartment Filter; When To Change The Exhaust Filter; How To Replace The Airclean Exhaust Filter - Miele SGNE0 Operating Instructions Manual

Hide thumbs Also See for SGNE0:
Table of Contents

Advertisement

,
If you do not insert a replacement
filter bag, the dust compartment lid is
designed not to close. Do not use
force!
When should I change the dust
compartment filter?
Whenever you start a new box of Miele
filter bag filters, you should change the
dust compartment filter. A new dust
compartment filter is included in every
box of Miele filter bags.
Replacing the dust compartment
filter (see fig. 29)
^ Open the dust compartment lid.
^ Grasp the finger grip and pull the
filter bag out of the holder.
^ Open the blue filter frame until it
clicks into place, use the clean
corner to remove the dust
compartment filter.
^ Insert a new dust compartment filter.
^ Close the filter frame.
^ Insert the new filter bag as far as it
will go into the blue holder.
^ Close the dust compartment lid until
it clicks into place.

When to change the exhaust filter?

Depending on the model, your vacuum
cleaner will use one of the following
standard exhaust filters (see fig. 8):
a AirClean Filter
Change the exhaust filter each time you
open a new box of Miele filter bags.
A new AirClean exhaust filter is included
in every box of Miele filter bags.
b Active AirClean 50 (black)
c HEPA AirClean 50 (white)
If the display of the exhaust filter
change indicator has turned fully red
(see fig. 13).
The indicator light will come on after
approx. 50 hours of operation, which is
equivalent to one year of average use.
The vacuum cleaner can still be used
however, the filter performance and
suction power will be reduced.
Instead of the Active AirClean 50 b or
HEPA AirClean 50 c exhaust filter instal-
led as standard, an AirClean a exhaust
filter can also be used (see section
"Maintenance and care - Exchanging
exhaust filters").
How to replace the AirClean exhaust
filter? (see fig. 30 + 31)
Make sure that only one exhaust
filter is inserted in the frame.
^ Open the dust compartment lid.
^ Squeeze the release for the filter
frame and open until it clicks.
^ Grasp one of the two clean corners
(see arrow) to remove the used Air-
Clean exhaust filter.
^ Insert a new AirClean exhaust filter.
en
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sgpe0

Table of Contents