Conference Metadata; The Conference Metadata Settings; Administrator Guide - TANDBERG S3.1 Administrator's Manual

Creating Conferences (continued)

Conference Metadata

The Conference Metadata will be
retrieved from the recording alias
that has been selected in the
Call Information section of the screen.
When a call is placed, additional
metadata on screen will include: Date,
Duration and URL information.
After you have entered the required
information click the Place Call button to
start the call or click the Return button
to cancal making the call and leave the
screen.
Copyright. Enter any copyright
information about the conference.
Keywords. Enter any keywords that
can be used when searching for the
conference.
Additional metadata displayed for a live
call includes: date, duration (duration of 0
will be shown until the call ends) and URL.
Duration. The length of the recorded
conference will be displayed in the
format hh:mm:ss. Any edited conference
will display the new length if the In and/
or Out Points have been changed..
URL. The URL to the conference will
be displayed at creation time of the
conference.
Table of
Introduction Installation
Contents
D13898.06
MAY 2008

The Conference Metadata Settings

TCS Backing up and
Quick Setup
Administration Restoring
Live calls only
Administrator Conference
Settings Setup Conferences
89
TANDBERG

ADMINISTRATOR GUIDE

Name. The name of the conference that
participants will see.
Description. Details about the conference
to be displayed beneath the
Conference list.
Speaker. Name or names of the
conference speakers.
Location. Where the conference takes
place.
Category. Select the category from the pull
down list for this conference.
Date. The date and time of the start of the
conference will be displayed at creation
time of the conference.
View
Appendices
CONTENT SERVER
Name in the