System Information; May 2008; Administrator Guide - TANDBERG S3.1 Administrator's Manual

Site Settings
Restart Service. This will terminate calls
that are currently live (that is, the calls
will be ended and conferences will not
be available for on demand playback).
Before restarting the service, check if
there are live conferences in progress in
the Live Conferences page or check the
call status on the LCD panel of the unit.
The Site Settings page will also display
a warning if calls are in progress. If you
click on the Restart Service button while
calls are in progress, you will be asked
to confirm if you want to go ahead with
the restart.
System Name. Enter the name for the
Content Server.
The System Name is used in the
TANDBERG Management Suite to
identify added Content Servers. It
is not the same as the S2 "System
Name" as that was the H.323 ID.
Table of
Introduction Installation
Contents
D13898.06

MAY 2008

TCS Backing up and
Quick Setup
Administration Restoring

System Information

Administrator Conference
Settings Setup Conferences
38
TANDBERG

ADMINISTRATOR GUIDE

View
Appendices
CONTENT SERVER