Remote Control Manual - Black & Decker BSAH1215AC Instruction Manual

REMOTE CONTROL INSTRUCTIONS
CAUTION
• Before first time use of the remote control, install the batteries and
ensure that the "+" and "-" poles are correctly positioned.
• Ensure the remote control is pointed to the signal receiving window,
and that there is no obstruction in between and the distance is 8m at
the maximum.
• Do not let any liquid in the remote control.
Do not expose the remote control directly to the sunlight or excessive
heat.
• If the remote control does not work normally, remove the batteries for
30 second before reinstalling them. If that doesn't work, replace the
batteries.
• When replacing the batteries, do not mix the new batteries with old
ones or mix batteries of different types, which could cause failure of
the remote control.
• If the remote control is not to be used for a long period of time,
remove the batteries first, lest the leakage from them may damage the
remote control.
• Properly dispose the discarded batteries.
NOTE: This is a universal remote control. Please understand that some
of the buttons may not function, depending on the specific air
conditioner you have purchased. (If a specific function is not
available on the air conditioner, pressing the corresponding but-
ton will simply have no response.)
Page 36