Black & Decker BSAH1215AC Instruction Manual page 22

INSTALLATION INSTRUCTIONS
7. Run the refrigerant lines and drain hose through the hole in
the wall.
• Then secure them to the designated spots on the indoor unit.
• Place the drain hose on the bottom to ensure a free flow of water.
• Each line comes pre-insulated, so you don't have to worry about
adding extra insulation,then connect them to the unit.
• Secure the included copper pipes, and drain hose together with elec-
trical tape.
• Do your best to minimize how much the pipes and cable bend to
ensure that the unit performs well.
• Make sure that the drainage pipe allows water to drain in an
appropriate place.
Page 22