Table of Contents
Advertisement
aus Installation and connection
Sensor set-
ting
SE:01
SE:02
5 Installation and con-
nection
To ensure proper operation, connect
the appliance to the power and water
supply correctly. Observe the spe-
cified criteria and the installation in-
structions.
5.1 Scope of supply
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note: The appliance has been tested
at the factory to check it is in working
order. It is possible that water has left
12
Description
Adjusts the pro-
gramme strength for
effective removal of
food remnants even
with low soiling
levels. Energy and
water consumption
are adjusted accord-
ingly.
Adjusts the pro-
gramme strength for
difficult conditions of
use, e.g. stubborn
dried-on food rem-
nants. Recommen-
ded setting when us-
ing organic or ecolo-
gical detergents con-
taining low levels of
active agents. En-
ergy and water con-
sumption are adjus-
ted accordingly.
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
¡ Dishwasher
¡ Operating instructions
¡ Installation Instructions
¡ Further information documents
¡ Installation material
¡ Steam guard plate
¡ Mains cable
5.2 Installing and connecting
the appliance
You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
over, e.g. by screwing it to the wall or
installing it under a continuous work-
top that is securely connected to ad-
jacent cabinets.
Follow the safety instructions.
1.
→ Page 4
Follow the instructions for electrical
2.
connection.
Check the Scope of supply and
3.
the condition of the appliance.
Consult the installation instructions
4.
for the installation dimensions re-
quired.
Make the appliance level using the
5.
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
Install the drainage connection.
6.
→ Page 13
Install the drinking water connec-
7.
tion. → Page 13
Connect the appliance to the
8.
power supply.
Advertisement
Table of Contents
