Pkm EBO9.4 Instruction Manual page 54

H
OW TO SET THE END OF THE COOKING
1. Place the food to be cooked or baked in the oven and close the door properly.
2. Select the desired oven function (s. chapter 3.5
temperature using the corresponding rotary knobs (A / C // s. chapter 3.2.3
C
ONTROL PANEL
3. Press the programme button
4. The decimal points of the clock (3) are flashing.
5. The operational status indicator "
6. The indicator "
7. The display indicates 00:00.
8. Set the desired time of the day by which the cooking / baking process should be
finished using the buttons
9. If the desired time of the day is displayed, release the
10. The cooking process starts immediately and the countdown starts a few seconds
later.
11. If the set time of the day has been reached, an acoustic signal sounds and the oven
will be switched off automatically.
12. The indicator "
flashing.
13. You can switch off the acoustic signal by pressing any button on the display.
14. To switch off the oven, the rotary knob for the selection of the oven functions
(A) and the rotary knob for the selection of the temperature (C) must be set
0
to position .
❖ After the oven has reached the set time of the day and is switched off automatically,
it must be reset to standard mode.
1. Press the programme button
2. The display indicates the time of the day.
3. Press the programme button
4. The operational status indicator "
5. The indicator "
6. The oven is ready for operation again.
CAUTION! To switch off the oven completely the rotary knobs of the
oven function and of the temperature control must be set to position 0. If the
).
(6) four times.
AUTOMATIC COOKING
+
(5) and / or
AUTOMATIC COOKING
H
OW TO RESET THE OVEN
AUTOMATIC COOKING
FUNCTIONS OF THE OVEN
" (2) on the display goes on.
OVEN IN USE
" (1) goes on.
-
(7).
" (1) and the indicator of the
(6) once for 3 seconds.
(6) one more time for 3 seconds.
" (2) on the display goes on.
OVEN IN USE
" (1) goes off.
54
/ :
BAKING TIME
+ -
/ buttons.
TIMER
:
) and oven
(4) are