Table of Contents
Advertisement
What's in this guide?
Getting started
Getting started
Waking up the system
To make a call you need to wake up the system from standby.
However, if someone calls you, the system will wake up by itself.
•
To wake up the system just pick up the remote control or press any
key. You may have to point the remote control towards the system
to make it discover you.
•
The system will now show the welcome screen, which contains
the main menu and it will display the main camera image in the
background.
•
The IP number (whenever applicable) and the system name are
displayed in the upper left corner.
•
The IP number is the dial-in number of your system.
•
The screen will also indicate if there are any calls you have missed.
D14306.01 USER GUIDE TANDBERG CODEC C90—NOVEMBER 2008
Making calls
Using the phone book
The IP number of your system is
the dial-in number of your system.
Should the system fail to respond to the remote control or to incoming
calls, make sure that:
•
The system is connected to line voltage
•
The remote control has working batteries
•
The internal cables, such as the monitor cable and/or the camera
cables are properly connected, cf. the installation sheet.
4
In-call features
After wake-up, the screen will typically look like this:
alice.wonderland@mycompany.com
Softkeys (described on the following pages).
Video conferencing
Date and
time of day.
Advertisement
Table of Contents
