Table of Contents
Advertisement
Cleaning & Maintenance (Cont.)
MAINTENANCE
CLEANING THE DRAIN PUMP FILTER
Cleaning the Drain Pump Filter
•
Make sure that the machine has finished the washing cycle and is empty. Switch it off and unplug it before
cleaning the drain pump filter.
Warning!
•
Be careful of hot water. Allow the water to cool down. Risk of scalding!
•
Clean the filter periodically every 3 months to ensure the normal operation of the appliance.
•
Make sure that the machine has finished the washing cycle and is empty. Switch it off
and unplug it before cleaning the drain pump filter.
1.
Open the lower cover cap.
• Be careful of hot water. Allow the water to cool down. Risk of scalding!
2. Open the filter by turning it counter clockwise. Note, there may be residual water in the unit that releases when
• Clean the filter periodically every 3 months to ensure the normal operation of the
the filter is opened. Place a shallow tray or towel underneath to collect the water.
appliance.
3. Remove any foreign objects collected in the filter.
4. Insert the filter back in position and close the cover cap.
1
1
Open the lower cover cap
Open the filter by turning
CAUTION! When the appliance is in use and depending on the cycle selected there may be water in the drain pump.
to the counter clockwise
Never remove the drain pump filter during a wash cycle, always wait until the cycle has finished and the machine is
empty. When replacing the filter and cover ensure it is securely tightened.
3
Remove extraneous matter
Close the lower cover cap
Caution!
•
When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.
Cleaning the Drain Pump Filter
Warning!
•
Make sure that the machine has finished the washing cycle and is empty. Switch it off
and unplug it before cleaning the drain pump filter.
• Be careful of hot water. Allow the water to cool down. Risk of scalding!
• Clean the filter periodically every 3 months to ensure the normal operation of the
appliance.
Open the lower cover cap
2
2
Remove extraneous matter
Caution!
4
•
When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.
29
18
1
2
Open the filter by turning
to the counter clockwise
3
4
3
4
Close the lower cover cap
29
Advertisement
Table of Contents
