Table of Contents
Advertisement
Operating Instructions (Cont.)
USING THE ADDITIONAL FUNCTIONS
DELAY FUNCTION
This function is used for delaying the start of the drying program up to 24 hours. When the delayed program
starts, the time starts to countdown on the display and the delay icon blinks.
1.
Load your laundry and make sure the machine door is closed.
2. Press the On/Off button, then use the program selector knob to select the desired program.
3. Press the Delay button to select the desired delay time.
4. Then press the Start/Pause button and the appliance will be in standby and the delay time will start
counting down. The drying procedure will be automatically performed when the delay time is over.
To cancel the Delay function, press the "Delay" button before starting the program until the display shows 0h.
If the program has already started, switch the appliance off and afterwards on and select a new program.
SPIN SPEED
When needed, the spin speed can be adjusted pressing the Speed button to cycle through the options in the
following order: 0-400-600-800-1000-1200-1400.
TEMPERATURE
When needed, the washing temperature can be adjusted by pressing the temperature button to cycle through
the options in the following order: Cold - 20°C- 40°C - 60°C - 90°C.
MUTING THE BUZZER
OPERATION
Follow the step below to mute the machine buzzer so there will be no sound once your program has ended.
Once your desired program is set press the Speed button for 3 seconds to mute the buzzer. To turn the buzzer
back on hold the Speed button for 3 seconds again.
DRY LEVEL
Dry Level
Press the Dry button continuously to choose the dryness level of your drying cycle. It will cycle through the
Press the Dry button continuously to choose the dry level: Soft DryExtra Dry/
options in the following order; Soft Dry - Extra Dry - Normal Dry - Timer Dry.
Normal Dry/ Timer Dry.
Soft Dry: For clothing that you require to be moderately dry.
Soft Dry: Only to dry slightly and then is just ok;
Extra Dry: For clothing that you require to be completely dry.
Extra Dry:Need to wear clothes immediately ,we can choose this function
Normal Dry: The normal dry procedure.
Normal Dry:The normal dry procedure
Timer Dry: Choose this function to dry clothes for a specific time.
Timer Dry: We can choose this function to dry clothes for a specific time.
Note!
NOTE: Drying hints
•
To ensure a quality dry ensure you separate textiles according to their drying requirements.
• Drying hints
•
If you want to iron the clothes after drying, ensure they are completely dry.
- Clothes could be dried after spinning
- To ensure quality dry the textiles,please classify them according to their
NOTE: Clothes not suitable for drying
kinds and the drying temperature.
•
Particularly delicate items such as synthetic curtains, wool, silk, clothes with metal inserts,nylon
- Synthetic should be set the proper drying time .
stockings, bulky clothes, such as bedcovers, quilts, sleeping bags and duvets must not be dried.
- If you want to iron the clothes after drying,please put them for a while.
•
Clothes padded with foam-rubber or similar materials must not be machine dried.
• Clothes not suitable for drying
•
Fabrics containing residue of any lotions or hair sprays, nail solvents or similar solutions must not be
- Particularly delicate items such as synthetic curtains,woolen and silk,
machine dried in order to avoid the formation of harmful vapours.
clothes with metal inserts,nylon stockings,bulky clothes,such as
anoraks,bedcovers,quilts,sleeping bags and duvets must not be dried.
CHILD LOCK
- Clothes padded with foam-rubber or materials similar to foam-rubber
This machine incorporates a special child safety lock, which can prevent children from carelessly pressing
must not be machine dried.
buttons and doing damage to themselves or the appliance.
- Fabrics containing residues of setting lotions or hair sprays, nail
1.
When the drying cycle is running, press the Anti-Crease button at the same time for 3 seconds to start
solvents or similar solutions must not be machine dried in order to avoid
the child lock function.
the formation of harmful vapours.
2. When child lock function is set, the display will show Child lock icon and all button are deactivated,
except the On/Off button.
3. To deactivate the child lock function, the Anti-Crease button shall be pressed at the same time for
3 seconds.
14
Advertisement
Table of Contents
