Operation Basics - Tascam Professional CD-RW900SX Owner's Manual

3 − Menu operation

Operation basics

1.
Select the desired menu option.
Press the MENU key on the front panel or remote control
to call up the desired menu. The menu option PLAY will be
shown on the display at first.
Front panel operation:
Rotate the MULTI JOG dial to select the desired menu
option, then push the dial to confirm.
Remote control operation:
Use the SKIP key to cycle through the different menu
options, then press the ENTER key to confirm.
The sub-menu option screen of the selected menu will be
displayed.
If the PLAY menu option is selected, the sub-menu option
shows up like this:
NOTE
Return to the menu option selection screen, press the
ESCAPE key on the front panel or the CLEAR key on the
remote control.
2.
Select the desired sub-menu.
Front panel operation:
Rotate the MULTI JOG dial to select the desired sub-
menu, then push the dial to enter the selection.
Remote control operation:
Use the SKIP key to select, then press the ENTER key.
The menu item screen of the selected sub-menu will
appear. If the sub-menu PLAY MODE is selected, the menu
item shows up like this:
NOTE
To return to the sub-menu option selection screen, press
the ESCAPE key on the front panel or the CLEAR key on the
remote control.
16
TASCAM CD-RW900SX
3.
Setting the desired menu item or value.
Front panel operation:
Use the MULTI JOG dial to select the desired menu item
or value. Pushing the dial enters and exits menu mode.
Remote control operation:
Use the SKIP key. Pressing the ENTER key confirms and
exits menu mode.
NOTE
Some menu options exist for confirmation purposes only,
and the setting cannot be changed.
4.
How to exit menu mode after setting (or confirmation),
during menu option display.
Front panel operation:
As well as pushing the MULTI JOG dial, you can use the
MENU key to exit menu mode.
Remote control operation:
Press the ENTER key to exit menu mode.
NOTE
The selected menu mode remains after power is turned off,
except the TEXT menu.
To reset all the settings and return to the factory setting,
use the F_PRESET sub-menu in the SYSTEM menu option. It
should only be used when a disc is not loaded.
When IR REMOTE is set to Disable, some functions can not be
operated using the remote control. On the other hand, set to
Enable allows any operation using the remote control.