Display - Tascam Professional CD-RW900SX Owner's Manual

Display

This display shows various types of operation information, including CD disc information, deck operation modes, and menu status.
1 TOC
The TOC indicator lights up red when a loaded disc contains
TOC (Table of Contents) data.
2 Track number display
During playback or selection, the track number is displayed.
When Incremental playback is on, and when in playback or
playback ready mode, the TRACK indicator blinks.
3 MP3
The MP3 indicator lights when a MP3 disc is in the deck.
4 Counter display
Depending on the time display mode, "TOTAL" or "REMAIN"
are lit. The counter display indication are in minutes (three
digits) and seconds (two digits).
5 KEY
The KEY indicator lights when Key Control is on.
6 PITCH
The PITCH indicator lights when Pitch Control is on.
7 A.CUE
The A.CUE indicator lights when Auto Cue is on.
8 A.READY
The A.READY indicator lights when Auto Ready is on.
9 A.TRACK
The A.TRACK indicator lights when the Auto Track is on.
0 Meter
This displays the playback level, as well as the input level of
the source device.
q A-B
The A-B indicator lights when the A-B repeat function is on.
Also, this flashes until a "B-point" is entered.
w REPEAT
The REPEAT indicator lights when the Repeat function is on.
e SYNC
The SYNC indicator lights up when SYNC is on.
2 − Features of the CD-RW900SX
r REC
When the SRC function is on, this lights during recording, or
in recording standby mode.
When the SRC function is off, this flashes during recording, or
in recording standby mode.
t 7 (PLAY)
This lights during playback, and also blinks during Auto Cue
point search.
y 9 (PAUSE)
This lights during playback or recording standby mode.
u OPTICAL
The OPTICAL indicator lights when the input source is set to
optical.
i COAXIAL
The COAXIAL indicator lights when the input source is set to
coaxial.
o ANALOG
The ANALOG indicator lights up when the input source is set
to analog.
p SINGLE
The SINGLE indicator lights when Single Playback mode is
set.
a RANDOM
This RANDOM indicator lights when Random Playback mode
is set.
s PROGRAM
The PROGRAM indicator lights when Program Playback mode
is set.
d DISC, GROUP, TRACK display
The DISC indicator lights up when a disc loaded and is
stopped.
The GROUP indicator lights up when MP3 Directory playback
mode is on.
The TRACK indicator lights up during playback or recording ,
also during playback or recording standby mode.
f Character display
Disc information, track information, menu, message, time,
and operation status are displayed here.
(TIMER)
g
This lights when the Timer Play function is on.
h CAPS
The CAPS indicator lights during title input to indicate CAPS
mode is on. In lower case letter mode, there is no indication.
13
TASCAM CD-RW900SX