Troublshooting - Tascam Professional CD-RW900SX Owner's Manual

9 − Reference and specifications

Troublshooting

Symptom
There is no power to the unit.
"Disc Error!", or "OPC Error!" is displayed. The disc may be dirty. Please replace the disc.
Playback is not possible.
No sound is output.
Recording is not possible.
Noise or static can be heard.
The unit does not retain settings.
Can't insert a disc.
32
TASCAM CD-RW900SX
Possible cause and remedy
Please check the power cord is properly plugged in.
This may be due to condensation. In this case, remove the disc, turn the power on and wait a
few hours, then try again.
i Confirm the connections with the audio system.
i Check the volume level, and proper amplifier operation.
i Confirm the connections with the audio system.
i Adjust the recording level.
i The disc may be for playback only. Please replace with a recordable disc.
Please re-position the unit away from strong source of magnetism such as a television.
While settings are retained each time they are made, in some case they will not be retained
when the power is turned off too soon. To prevent this from happening, do not turn off the
power right after making a seting.
Take the disc out and press the EJECT key to reset. Then try again.
Never use force to insert the disc into the slot.