Setting The Built-In Clock; Shutting Down; Connecting Monitoring Devices And Headphones; Basic Menu Operation Procedures - Tascam DR-22WL Owner's Manual

Setting the built-in clock

When the unit is started up for the first time (or after being left
without batteries), the screen appears before
DATE/TIME
the start-up screen to allow the date and time to be set.
Press the F4 button to move the cursor (highlighted part),
and use the F2 and F3 buttons to set the date and time.
When finished setting, press the F1
button to return to the
menu screen.

Shutting down

While the unit is turned on, slide the HOLD/
position until
TASCAM DR-22WL shutting
appears on the display.
down
The power turns off in a few seconds.
Connecting monitoring devices and
headphones
To listen with headphones, connect them to the
jack.
To listen with an external monitoring system (powered monitor
speakers or an amplifier and speakers), connect it to the
LINE OUT jack.
Powered monitor speakers
an amplifier and speakers
Headphones

Basic menu operation procedures

Press the
1.
on the menu screen.
Press the F1
2.
Use the F2
3.
menu item to set.
Press the F4
4.
screen.
Use the F2
5.
switch to the
Press the F1
6.
menu page.
Repeat step 2 to 6 as necessary to set other items.
7.
When finished, press the
8.
to the Home Screen.

Menu structure

/LINE OUT
MENU
REC
/
TOOL
SETUP
INFORMATION
or
/MENU/8 button to open the
page
REC
button to open menu pages.
or F3
button to select (highlight) a
button to show the pop-up setting
or F3 button to change the setting.
button to set a different item in the same
/MENU/8 button to return
Basic settings for recording
Convenient functions for playback files
Basic settings to make the device easy to
use
View information

Recording

Recording Screen

The screen below is shown when the unit is in the recording
standby state or while recording is in progress.
Recording mode
1
The recording file format, sampling frequency and stereo/
mono ( / ) status are shown.
ST MONO
Low cut filter on/off status
2
Blank: Low pass filter off
: Low pass filter on
Limiter on/off status
3
Blank: Limiter off
: Limiter on
4 Peak reduction on/off status
Blank: Peak reduction off
: Peak reduction on
5 Reverb on/off status
Icon On/off status
Blank Reverb off
Reverb on (Recording with the effector on)
Reverb on (SEND status)
TASCAM DR-22WL
9