System Settings And Formatting; Setting The Automatic Power Saving Function; Setting The Backlight; Adjusting The Display Contrast - Tascam DR-05 Reference Manual

System Settings and Formatting

From the SYSTEM screen, you can change various
settings to optimize the device for your use
environment and other requirements. You can also
initialize the unit and format the microSD card.
1 Press the MENU button to open the MENU screen.
2 Use the + or − button to select OTHERS, and press
the 7 button to open the OTHERS submenu.
3 Use the + or − button to select SYSTEM, and press
the 7 button.
SYSTEM screen appears.
The following settings can be made for the items on
the SYSTEM screen.
Use the . or / button and the + or − button to
set each item.
Setting the automatic power saving
function
You can use the AUTO PWR SAVE item to set the amount
of time from when the unit last operated or was used
until the power turns off automatically.
Options: OFF (turned off ), 3min, 5min, 10min,
30min(factory setting)

Setting the backlight

Use BACKLIGHT to set the time until the backlight
automatically turns OFF after the last operation when
powered by the internal battery.
Options: OFF (turned off ), 5SEC. (factory setting), 10SEC.
, 15SEC., 30SEC., ALWAYS (always on)

Adjusting the display contrast

Use CONTRAST to adjust the display contrast.
Options: 1–20 (factory setting: 5)

Setting the type of AA batteries

Use BATTERY TYPE to set the type of the AA batteries that
you are using. This setting is used to show the amount
of remaining battery charge and determine if the unit
has enough power for normal operation.
Values: ALKAL (alkaline batteries, default),
Ni-MH (nickel-metal hydride batteries)
11–Settings and Information

Setting the language

Use the LANGUAGE item to set the language shown on
the display.
1. Use the + or − button to select the LANGUAGE item
and press the 7 button.
Options
use English
Eng.:
use Japanese
日本語:
Fran.: use French
use Spanish
Españ:
use German
Deu.:
use Italian
Ital.:
use Russian
Рус.:
use Chinese
中文:
2. Press the 7 button to open a pop-up
confirmation window.
3. Press the 7 button to confirm the language
selection. To cancel language selection, press
the ¤ (HOME) [8] button.

Restoring the factory settings

Use the INITIALIZE item to restore the various settings
of this unit to their factory settings.
1 Use the + or − button to select INITIALIZE, and
press the 7 button to highlight Exec.
2 Press the 7 button again to open a
confirmation pop-up window.
3 Press the 7 button to initialize the unit. Press
¤ (HOME) [8] to cancel initialization.
47
TASCAM DR-05