Password Enable - Swann DVR8-2500 Operating Instructions Manual

D9 Viewer Software
Network
For users with minimal network knowledge it is best to use the DHCP when setting the DVR to view remotely. Note:
These settings should already being configured using the DVR. See Network Setup on page 35.
1. Network - Type
i. Scroll over the dropdown list and LEFT click.
ii. Select DHCP to setup the DVR & view it remotely.
iii. LEFT click.
iv. Logout and log back in.
Setting
Here you can set the location where files will be saved, assign an admin & user password and set up daylight savings
time.
File Save Path
1. Scroll over & LEFT click the button.
2. Select the location where you want to store saved files.
3. LEFT click OK.

Password Enable

The password can restrict unauthorized users from accessing the DVR either by restricting them to enter the menu on
the DVR or from logging in remotely.
1. Scroll over the drop-down list and left click.
2. Select ON if you wish to set up a password for the DVR.
3. Left click.
You will see four text fields become active; one for USER password one for ADMIN
password and the other two for verifying the passwords you input.
1. LEFT click on the USER PASSWORD text field.
2. Type in your password. Note: be sure to delete the default password already
in the text field.
3. Now confirm your password by retyping it in the RE-ENTER field.
4. Follow the steps above to enter the ADMIN password in the ADMIN PASS-
WORD text field.
5. LEFT click APPLY.
36