System Password - Swann DVR4-1160 Operating Instructions Manual

System Password

The DVR includes the option of a six character password. When the password is enabled the DVR will prompt you for it
when you try to:
a. stop a recording
b. reset the menu
c. access the main menu
d. format the hard drive
You will be prompted for the password when attempting to
format the hard drive whether the password is enabled or not.
Enabling and disabling the password
1. Select the MISCELLANEOUS SETUP option in the Main menu.
2. Scroll down to the PASSWORD ENABLE option.
3.Push the SELECT button to set to ON to enable the password
and OFF to disable it.
4.Push the MENU button to go back to the MAIN menu.
Changing the password
1. Select the MISCELLANEOUS SETUP option in the Main menu.
2. Select the first option CHANGE PASSWORD
3.Key in the current password in the first blank field.
4.In the second field key in the new password. Any of the but-
tons (except for the MENU button) on the remote control or the
DVR front panel can be used to make a password.
5. Confirm the new password by re-entering it in the third blank
field.
The default system password for the DVR is "111111"
Note: the System Password is different to the Admin Password. See User Setup for informa-
tion on setting up the Admin Password.