Vermeiren Gemini 2 User Manual page 12

EN
NL
3.2.7 Side supports (optional)
Head pelots
13
15
Adjusting width:
12
1. Loosen the two knurled knobs (12) on the rear
2. Move the head pelot (13) inwards or outwards
3. Retighten the two knurled knobs (12).
4. Check that the pelot (13) is well fixated.
5. Repeat these instructions for the other pelot
Adjusting height:
1. Loosen the two knurled knobs (12) on the rear
2. Move the head pelot (13) up or down until the
3. Retighten the two knurled knobs (12).
4. Check that the pelot (13) is well fixated.
5. Repeat these instructions for the other pelot
Adjusting height:
1. Loosen the two knurled knobs (14) on the side
2. Move the head pelot (15) up or down until the
3. Retighten the knurled knobs (14).
4. Check that the pelot (15) is well fixated.
14
5. Repeat these instructions for the other pelot.
Adjusting depth:
1. Loosen the two knurled knobs (14) on the side
2. Move the head pelot (15) to the front or back
3. Retighten the two knurled knobs (14).
4. Check that the pelot (15) is well fixated.
5. Repeat these instructions for the other pelot.
10
side of the backrest.
until the desired position (stepless, range 25
mm each side).
(13).
side of the backrest.
desired height (stepless, range 30 mm).
(13).
of the pelot.
desired height (stepless, range 25 mm).
of the pelot.
until the desired depth (stepless, range 22,5
mm).
Gemini 2
2021-06
Using your wheelchair