Cleaning And Maintenance - Toshiba GR-RM424WE-PMA Owner's Manual

Cleaning and Maintenance

Sliding box of the freezing chamber,
freezing storage container
Water washing
Disassembly method
Pull out the door to the maximum and take out the
sliding box on the lower layer and the sliding box on
the upper layer of the freezing chamber.
Lift the door and keep pulling it out until it touches
the ground. Then take out the freezing storage
container.
Installation method
Pull the door out to the maximum. Lift the door and
keep pulling it out until it touches the ground. Then
insert the protrusion of the freezing storage container
into the hole on the guide rail and installed it in place.
Install the sliding box on the lower layer and the
sliding box on the upper layer to the freezing
chamber, and then lift the door slightly to close the
door.
Quick-cooling fresh-keeping box
Disassembly method
Pull the quick-cooling fresh-keeping box out to the maximum, lift it up
slightly, and take it out.
Installation method
Load the quick-cooling
fresh-keeping box along the
guide rail and push
it to the innermost.
Guide rail
Protrusion
Two-stage movable shelf
Both hands should be used to take out or place the
Glass shelf
heavy glass products.
Disassembly method
· The installation method is opposite to the
Fold the shelf.
18
...Continued
Water washing
Water washing
disassembly method.
Pull it up obliquely to take it out.