Balancing the Machine
The type of shoulder strap and carabiner
depends on the market and the basic
power tool.
Attaching Machine to Shoulder Strap
2
1
2
Attach the carabiner (1) to the
N
carrying ring (2) on the drive tube.
3
Loosen the screw (3).
N
KB, KW
Balancing the Machine
Slide the carrying ring up or down
N
the drive tube until the sweeping
1
attachments touch the ground.
Tighten down the screw on the
N
carrying ring.
Detaching Machine from Shoulder Strap
1
2
Press down the bar on the
N
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
Starting / Stopping the
Engine
Starting the Engine
Always follow the starting procedure
described in the basic power tool
instruction manual.
1
2
Place the unit on the ground: The
N
sweeping attachents may touch the
ground, but no other obstacles.
Make sure you have a safe and
N
secure footing.
Hold the unit firmly on the ground
N
with your left hand and press down
– thumb under the housing – do not
touch the throttle trigger or trigger
lockout.
NOTICE
Do not stand or kneel on the drive tube.
English
17