Auxiliary Input Display Setting - Kenwood Z838W Troubleshooting Manual

Each time the button is pressed the Wallpaper scan is turned Each time the button is pressed the Wallpaper scan is turned
ON and OFF. ON and OFF.
2 Select the wallpaper. 2 Select the wallpaper.
Press the [4] or [¢] button. Press the [4] or [¢] button.
Each time the button is pressed the wallpaper changes. Each time the button is pressed the wallpaper changes.
3 3
Exit Display Control mode Exit Display Control mode
Press the [S.A] button. Press the [S.A] button.

Auxiliary Input Display Setting

Auxiliary Input Display Setting
Selecting the display when this device is switched to Auxiliary Selecting the display when this device is switched to Auxiliary
input source. input source.
1 1
Select Auxiliary input source Select Auxiliary input source
Press the [SRC] button. Press the [SRC] button.
Select the "AUX" display. Select the "AUX" display.
2 2
Enter Auxiliary input display setting mode Enter Auxiliary input display setting mode
Press the [NAME.S] button for at least 2 seconds. Press the [NAME.S] button for at least 2 seconds.
The presently selected AUX Name is blinks. The presently selected AUX Name is blinks.
3 3
Select the Auxiliary input display Select the Auxiliary input display
Press the [4] or [¢] button. Press the [4] or [¢] button.
Each time the button is pressed it switches through the below Each time the button is pressed it switches through the below
displays. displays.
• "AUX" • "AUX"
• "TV" • "TV"
• "VCP" • "VCP"
• "GAME" • "GAME"
• "PORTABLE" • "PORTABLE"
• "DVD" • "DVD"
4 4
Exit Auxiliary input display setting mode Exit Auxiliary input display setting mode
Press the [NAME.S] button. Press the [NAME.S] button.
When operation stops for 10 seconds, the name at that time is When operation stops for 10 seconds, the name at that time is
selected, and Auxiliary input display setting mode closes. selected, and Auxiliary input display setting mode closes.
— 19 — — 19 —