Frequency Display - Kenwood T-1001L Instruction Manual

RDS (Radio Data System) (For U.K. and Europe)
RDS is a system which transmits useful information (digital
data) for FM broadcasts together with the broadcast signal.
Tuners and receivers designed for RDS reception can extract
the information from the broadcast signal for use with vari-
ous functions such as automatic display of the station name.
[ This unit is equipped with the following functions utiliz-
ing RDS data:
(In some areas, some functions cannot be activated and some func-
tion names are differ as follows.)
PTY (Program Type Identification) Search : (See page 15.)
The tuner automatically searches for a station which is currently
broadcasting a specified program type (genre).
AF (Alternative Frequencies) Search : (See page 16.)
When a weak signal is received, the tuner automatically
searches for alternative frequencies broadcasting the same
program and selects the best signal.
PS (Program Service Name) Display : (refer to the table be-
low.) When an RDS broadcast is received, the station name is
automatically displayed.
CT (Clock Time) Display : (refer to the table below.)
Some RDS stations transmit clock data along with the broad-
cast signal.
When the CT display is selected with the DISPLAY key, The
clock data is not displayed if it is not received.
DISPLAY key
Pressing the DISPLAY key changes the display contents.
The display returns to the original display after about 5
seconds. Display mode priority ranking
poesia When an RDS broadcast ® => @ => 6)
is received : t
When a non-RDS broadcast @
2 is received :
@ PS (Program Service Name) Display :
When an RDS broadcast is received, the station name is automati-
cally displayed.
If no PS data is transmitted, the display changes to the © fre-
quency display.
The RDS indicator lights when an
RDS broadcast (signal) is received.
AUTO) TUNED STEREO
mm TA Ld
|
@® CT (Clock Time) Display : :
When an RDS broadcast is received, the hour and mraute are shown
on the display.
@ Frequency Display :
The frequency of the current station is displayed.
If the clock data is not received, the PS display and freg uency disp!
appears alternately.