Operations -Cd Receiver; Switching Display; Text Scroll - Kenwood KTC-HR300 Instruction Manual

Operations -CD Receiver-
Switching Display
When you are listening to an HD Radio station, you
can switch over the display information as follows.
For operations, see the <Switching Display>/
<Display Mode Switching>/ <Text Display
Switching> page of the instruction manual of
your control unit.
Q..
~
• What is displayed may partly depend on control unit to
be connected.
HD Radio mode
Song title/ Artist name/ Album name/
Genre/ Detailed station name
(128)
Receive Frequency "Frequency"/ "FREO"
The number in the ( ) indicates the maximum
number of displayed characters.
When a current receiving station dose not send
text information, the frequency is displayed.
The Station name or Song title during reception of
the Digital FM broadcasting displays the channel
information as follows.
- (j)Digital AM
"(Station name) HD"
"(Song title/ Artistname I.)"
- (j)Digital FM "(Station name) HD"
"(Song title/Artist name I ..)"
~
0Digital FM-1
"(Station name)
HD1"
"(Song title/ Artist name I ..)"
@Digital FM-2
"(Station name)
HD2"
: "(Song title/ Artistname I.)"
CD:
When the Main channel is received
• @:
The sub channel is available in Main channel
which is received.
• @:
When the Sub channel is received
• When listening by the Analog sound, "HD" display
switches to "FM" or "AM".
Q
~
In HD Radio mode, the display of Station Name or Song
title should be set up. The channel information cannot
be displayed in the Frequency display.
• Though some models have two or more tines in the
display, you cannot display the same information in both
the Upper Part and the Lower Part.
• In the control unit with
MIS,
PIS indicator, the indicator
will be turned ON or OFF as described below.
- CD:
MIS,
PIS indicator is OFF.
- 0:
MIS,
PIS indicator is ON.
- 0:
MIS, PIS indicator blinks.
6
I
KTC-HR300
Text Scroll
Scrolls the display title.
For operations, see the CD features of <Text
Scroll> in the instruction manual of your
control unit.