Dual Zone System; Tuner Features - Kenwood Z838W Troubleshooting Manual

Hide thumbs Also See for Z838W:

Table of Contents

General features

Dual Zone System

Makes the sound different for the front channel and rear

channel.

One side of both the front and rear channels outputs the internal

source sound, and the other side outputs the Auxiliary input

source sound.

Press the [S.A] button for at least 1 second.

Each time the button is pressed for at least 1 second Dual Zone

System switches ON or OFF.

When it's ON, "Zone 2 ON" is displayed.

• When the Dual Zone System is ON, there is no Auxiliary input

source channel audio control or other effect.

• When the Dual Zone System is being used the internal source

channel can't be used with an External disc source.

• When you set the Dual zone system to ON while the non-fading

preout is switched ON, the sound of the non-fading preout isn't

output.

• The Dual Zone System can be used with the optional Auxiliary

input sources shown below.

- KCA-S210A

- CA-C1AX

- CD changer with an Auxiliary input function installed.

• This function can be used in Auxiliary input source.

• The front channel and rear channel can be set to be the internal

source or the Auxiliary input source. Refer to the <Dual Zone

System Setting> (page 38).

SRC

The display above is an example when Display type is set to "Display Type A".

The function indicator is displayed only if it is "Display Type A".

— 22 —

ST indicator

Frequency display

Table of Contents