Table of Contents
Advertisement
DAB features
Dual Channel Audio Switching
The Dual Channel Audio can be switched between Main and Sub.
1
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
2
Press the ¢ button repeatedly until the Dual Channel Audio switching
function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "DUAL MAIN"["MAIN"] or "DUAL
SUB"["SUB"] in the display, indicating the output of the Main audio or
Sub audio, respectively.
The DUAL indicator lights during reception of a Dual Channel Audio
programme.
3
Switching settings
Press either the AM button or FM button to switch the Dual Channel
Audio mode.
The display and setting will change.
NOTE
When "DUAL SUB"["SUB"] is selected, the Sub audio continues to be
received even when the service is switched to another, provided that the
new service also broadcast a Dual Channel Audio programme.
4
Press the MENU button to end the menu mode.
Dynamic Range Control (DRC)
When there is a lot of noise such as when driving, this function
narrows the dynamic range and corrects it to an easy-to-listen-to
volume. When the Dynamic Range Control is ON or when the car is
stopped or when listening closely to the music, the music can be heard
as is. When the Dynamic Range Control is OFF, selection can be made
to suit the wishes of the listener or suit the listening environment.
Switching DRC ON or OFF :
1
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
2
Press the ¢ button and change the function to be set to Dynamic
Range Control.
Press the 4 button to search in the other direction.
The Dynamic Range Control is displayed as "DRC ON"["DRC ON"] or
"DRC OFF"["DRC OFF"].
The Dynamic Range Control is on during the display of "DRC ON"["DRC
ON"], and off during the display of "DRC OFF"["DRC OFF"].
3
Switching settings
Press either the AM button or FM button.
The display and setting will change.
4
Press the MENU button to end the menu mode.
NOTE
The dynamic range is changed based on the Dynamic Range Control
information that is sent from the broadcast station and as such this
function will not operate unless the broadcast station is sending the
information.
Display Switching/Dynamic Label
The information shown in the display can be selected.
Switching the Display:
Each time you press the DISP button, the information that is displayed
10
MASK models
AM
DISP
40W
x
4
TUNER
TI
DISP/
VOL
TEXT
ADJ
EJECT
PTY
DAB
LOUD
MENU
DISC
AUD
MENU 4
for KRC-PS959R, KDC-PS9060R
Frequency
Service Label
KRC-859R/859C/859W/759R
for KDC-8060R/7060R
Frequency
Service Label
Flip-down TDF models
AM
FM
DISP
40W
x
4
PROG/PTY
SRC
FM
DISC
ATT
LOUD
VOL ADJ
MENU
AM
DISP/TEXT
1
2
3
4
5
6
TI
AUDIO
NAME.S
4
MENU
for KRC-659R, KDC-6060R, KMD-860R
Frequency
LOUD
ATT
TA
ST
DAB
IN
T I
LOUD
ATT
TA
NEWS
B
NRDUAL
FM
+
ST
DAB
IN
T I
TEXT
MTL
TP
REG
DISC
III
AM
-
AUTO
1 2
NEWS
B
NRDUAL
FM
+
TEXT
MTL
TP
REG
DISC
III
AM
-
AUTO
1 2
Service Label
for KRC-559R, KDC-5060R
Frequency
III
TA
T I
IN
NEWS
B NR
DUAL
CHANGER
LOUD
III
ST
ATT
MTL
TP
REG
PTY
DAB
AUTO
TA
T I
IN
NEWS
B NR
DUAL
CHANGER
LOUD
ST
ATT
MTL
TP
REG
PTY
DAB
AUTO
Service Label
in priority changes as shown below.
FM
Service Label ("SERVICE LABEL", ["SERVICE"])
NAME. S
CLOSE
PWR OFF
Ensemble Label ("ENSEMBLE LABEL", ["ENSEMBLE"])
Dynamic Label ("DYNAMIC LABEL", ["DYNAMIC"])
¢
Clock ("CLOCK") (With the exception of some models)
Received Frequency ("RECEIVE FREQUENCY", ["FREQ"])
Dynamic Label :
This is the character information associated with the current audio
programme and shown by scrolling in the display.
NOTE
• The display of the Service Label and Ensemble Label will be abbreviated
to within 8 characters depending on the control unit.
• Depending on the type of characters of the Service Label, Ensemble
Label or Dynamic Label, some characters may not be displayable.
• The various messages are sent by scrolling when the Dynamic Label has
not been sent, or during accumulation.
• The clock is displayed only when the Switching Clock display function is
on. (Please refer to the control unit Instruction Manual.)
Text Scroll
This function permits the text to be scrolled and the entire text to be
displayed. Switching between manual scrolling and automatic
scrolling is permitted. The factory default is manual scrolling.
To scroll manually :
1
Press the DISP button to display the Dynamic Label.
PWR
OFF
2
Holding down the DISP button for one second or more results in one
scrolling display of the Dynamic Label.
MW/LW
Manual/Automatic scroll switching :
¢
1
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
2
Press the ¢ button repeatedly to switch the function to be set to the
text scroll function.
Pressing the 4 button results in the functions being switched in the
reverse order.
The text scroll function is displayed with "SCROLL MANU"["SCL MANU"]
or "SCROLL AUTO"["SCL AUTO"].
"SCROLL MANU"["SCL MANU"]......Manual scrolling
"SCROLL AUTO"["SCL AUTO"]......Automatic scrolling
3
Switching settings
Press either the AM button or FM button.
The display and setting will change.
4
Press the MENU button to end the menu mode.
To scroll automatically :
1
Press the DISP button to display the Dynamic Label. The display of the
1
2
Dynamic Label will be scrolled repeatedly.
NOTE
1
2
The setting of Manual/Automatic scroll switching is a common setting
with Text Scroll of the CD mode and disc changer mode.
11
Advertisement
Table of Contents
