Mounting - Smeg Classic SA661X2 Manual

Table of Contents

Advertisement

5.3 Mounting

Over built-in oven unit
The clearance between the hob and the
kitchen furniture or other installed
appliances must be enough to ensure
sufficient ventilation and air discharge.
If installed above an oven, a space must be
left between the bottom of the hob and the
top of the appliance installed below.
If installed on top of an oven, the
latter must be equipped with a
cooling fan.
Installation
On top of an empty kitchen unit or
drawers
If there are other pieces of furniture (lateral
walls, drawers, etc.), dishwashers or fridges
under the hob, a double-layer wooden
base must be installed at least 20 mm from
the bottom of the hob to avoid any
accidental contact. It must only be possible
to remove the double-layer base by using
suitable tools.
Failure to install the double-layer
wooden base exposes the user to
possible accidental contact with
sharp or hot parts.
opens on bottom
opens on rear
19

Advertisement

Table of Contents
loading

Table of Contents