Table of Contents
Advertisement
Hob seal
To prevent leakage of liquid between the
frame of the hob and the countertop, place
the adhesive seal provided along the entire
outer edge of the hob before assembly.
Do not use silicone to secure the
hob. This would make it impossible
to remove the hob, if necessary,
without damaging it.
Spring clips
To ensure the hob is fixed and centred as
accurately as possible, the clips provided
must be positioned as described below:
1. Fit the clips by gently pressing them
horizontally into the appropriate space.
18
Installation
2. Then turn them upwards to fix them in
place.
Fixing brackets
• Screw the fixing brackets into the holes
on the sides of the bottom casing to
properly fasten the hob to the structure.
If tightened too much the glass
may be strained and crack.
Advertisement
Table of Contents
