How To Use - Panasonic MX-EX1031 Operating Instructions Manual

Blender
1
Place the ingredients into blender jug, and then close the lid.
2
Attach blender jug to the motor housing.
Align the on the motor
housing with the on the
3
Plug in. Hold the blender jug, and then turn the rotary
switch to " 1 " position to start.
If the appliance stops
during operation. (P. EN8)
4
0 " position to switch off. Unplug.
Turn the blender jug
anticlockwise to remove it,
open the lid and take out
the ingredients.
How to use the scraper
To avoid ingredients splattering, it is recommended to insert the scraper from the lid opening
Scraper is useful when
ingredients stick to the inner side of container. (e.g. garlic, chile pepper)

How to Use

1
2
2
2
3
3
turn the rotary switch to "
3
4
4
2
Dry mill
To disassemble
Turn anticlockwise
2
Make sure the mill
gasket is not damaged
Turn the mill container upside down and place the
ingredients in it. Twist the mill container base
clockwise until you hear a click sound.
Attach the mill container to the motor housing.
Align the on the motor
housing with the on the mill
container.
Twist mill container clockwise
Plug in. Hold the mill container, and then turn the rotary
switch to "1" position to start.
If the appliance stops during
operation. (P. EN8)
When grinding is completed, turn the rotary switch to
" 0" position to switch off. Unplug.
Turn the mill container
anticlockwise to remove it,
open the mill container, and
take out the ingredients.
To assemble
Turn clockwise
2
2
2
3
4
3
2