D) Trimming The Controls - Reely Mini Hawk Operating Instructions Manual

d) Trimming the controls

You will be able accurately to trim your model once you have got a feel for it. Trimming can be used to correct the
flight direction of your model should it tend to constantly fly in one direction in straight flight without the transmitter
joysticks being manipulated.
Aileron trim:
If the model tends to roll around the longitudinal axis to the right, whereby the left wing tip is raised and the right wing
tip is lowered, repeatedly press the left trim button (see also Figure 15, no. 4) for the ailerons (see white arrows in
Figure 27). Continue pressing the button until the model no longer tends to roll. If the model tends to roll to the left,
use the right trim button (see dark arrows in Figure 27) for correction.
Elevator trim:
If the model tends automatically to ascend, repeatedly press the upper trim button (see also Figure 15, no. 5) for the
elevator (see white arrows in Figure 28). Continue pressing the button until the model no longer tends to ascend. If the
model tends to fly downwards, use the lower trim button (see dark arrows in Figure 28) for correction.
72
Figure 27
Figure 28