Robin America RGV4100 Service Manual page 52

(4) Fasten the other earth cable with 5 mm termi-
nal to the unpainted bolt hole on the frame.
(See Fig.10-28.)
10-3-7 MUFFLER and MUFFLER COVER
(1) Temporarily fix the muffler bracket to either the
rear or front covers for RGV6100 or RGV2800.
M8 x 20 mm bolt and washer Ass'y . . . 2 pcs.
(2) Attach the muffler cover 1 and the muffler cover
2 to the muffler.
M6 x 10 mm bolt and washer Ass'y . . . 8 pcs.
T g i h e t n n i g o t q r u
7 9 . - 9 8 . N - m
8 0 - 1 0 0 k g c - m
5 8 . - 7 2 . - t f b l
(3) Put the muffler gasket to the engine.
(4) Attach the muffler with muffler cover to the
engine and the rear cover .
1 Tighten the two nuts for the muffler first. Use
the spring washers for RGV4100 and
RGV6100.
8 mm stainless nut . . . 2 pcs.
8 mm spring washer . . . 2 pcs.
(for RGV4100 and RGV6100 only)
T g i h e t n n i g o t q r u
2 1 6 . - 2 7 4 . N - m
2 2 0 - 2 8 0 k g c - m
1 5 8 . - 2 0 2 . - t f b l
2 Tighten the bolts to fix the muffler to the rear
cover.
M8 x 20 mm bolt and washer Ass'y . . . 2 pcs.
(for RGV4100)
T g i h e t n n i g o t q r u
1 8 6 . - 2 4 5 . N - m
1 9 0 - 2 5 0 k g c - m
1 3 7 . - 1 8 0 . - t f b l
e
e
e
- 49 -
EARTH CABLE
Fig. 10-28
Fig. 10-29